Description
Code
Models by GOST15150/ ISO12944
Portable Dry Powder MIG E Fire Extinguisher 9 kg ABCE (4А, 183В, С, Е)
111-25
OМ2/C4-Н
Portable Dry Powder MIG E Fire Extinguisher 9 kg ABCE (4А, 183В, С, Е)
111-224
ОМ2/С5-М
- 4 years warranty
- Life time 15 years
- TR CU 043/2017 certified
- approved by RMRS
Main technical data and characteristics
Rank of standardized fire source (fire extinguishing capability) for class A
4A
Rank of standardized fire source (fire extinguishing capability) for class B
183B
Fire extinguishing capability for class C
available (not measured)
Fire extinguishing capability for class E
up to 1000V
Operating temperature range, °C
from - 50 to + 50
Gross weight, kg
12,7
Dimensions(length, cylinder diameter), mm., not more
590x185
Mass of fire extinguishing agent, kg
9±0,45
Cylinder name and manufacturer
BP-9 MIG, JSC Pozhtechnika
Cylinder volume, l
11,3
Number of welds at the cylinder
4 ( typical design)
Cylinder service life, years
15
Fire extinguisher service life, years
15
Branded factory repair work
available (factory warranty for factory repair work is 5 years)
Minimum recharge cycle
every 5 years
Warranty, years
4 (twice as much as the standard)
Recommended transport brackets
KTR-8/9(code 121-104), KTH-8(code 121-154), KTRR(code 121-106)
WHAT IT IS WORTH PAYING ATTENTION TO:
Stored pressureFire extinguishing capability on suppression of model sets of fire of a class A and B: 4A, 183B.
The fire extinguishing capability of the fire extinguisher is confirmed with the certificate of conformity.
Range of temperatures of operation: from minus 50 to plus 50 °C.
The cylinder of the fire extinguisher is certified on compliance to requirements of the Technical Regulation TR TS 032/2013 "TR on safety of high pressure equipment ".
According to the existing standard rate, powder fire extinguisher MIG E marking of a cylinder is executed mechanically and contains the following records: logo of JSC Pozhtechnika, mark of conformity of "EAC", name of a cylinder, serial number of a cylinder, month and year of production of a cylinder, year of the following re-examination of a cylinder, range of temperatures of operation of the cylinder "from-50 C to +50 C", working and trial pressure of a cylinder, weight and amount of an empty cylinder.
The valve is supplied with the pressure discharge dump which automatically makes dumping of air excess from the fire extinguisher in case of increase in pressure over the worker and provides the termination of air dumping in case of working pressure recovery, and also the nipple in the indicator nest providing replacement of the indicator without fire extinguisher discharge.
The relevance of fire suppression using inert gases
22 October 2023
How to Protect a Hotel from Fire
24 August 2023
Transport brackets MIG for all types of fire extinguishers
15 August 2023