Portable Dry Powder Fire Extinguisher MIG 3 kg АВСЕ-110 (2А, 55В, С, Е)

Information center

+375 (29) 668-22-77

Working hours: Mo-Fr: 8:15-17:00

CREATING FOR LIFE

Description
Code
Models by GOST15150/ ISO12944
Portable Dry Powder Fire Extinguisher MIG 3 kg АВСЕ-110 (2А, 55В, С, Е)
111-62
O2/C2 (indoors)
Portable Dry Powder Fire Extinguisher MIG 3 kg АВСЕ-110 (2А, 55В, С, Е)
111-203
OM2/C4-H (outdoors)
Main technical data and characteristics
Rank of standardized fire source (fire extinguishing capability) for class A
2A
Rank of standardized fire source (fire extinguishing capability) for class B
55B
Fire extinguishing capability for class C
available (not measured)
Fire extinguishing capability for class E
up to 1000V
Operating temperature range, °C
from - 50 to + 50 °C
Gross weight, kg
4,8
Dimensions(length, cylinder diameter), mm., not more
505x120
Mass of fire extinguishing agent, kg
3±0,15
Cylinder name and manufacturer
BP-3 MIG, JSC Pozhtechnika
Cylinder volume, l
3,8
Number of welds at the cylinder
4 ( typical design)
Cylinder service life, years
15
Fire extinguisher service life, years
15
Branded factory repair work
available (factory warranty for factory repair work is 5 years)
Minimum recharge cycle
every 5 years
Warranty, years
4 (twice as much as the standard)
Recommended transport brackets
KTR-3(code 121-173), KTM-3(code 121-147), KTH-3(code 121-82)

       Professional powder fire extinguisher with increased fire extinguishing ability 2A 55V with a charge of 3 kg, which is often equipped in the cabins of trucks, buses and special equipment. In addition, it is recommended for the protection of premises of categories G and D, administrative and public buildings and equipment of railway transport. It can be a reliable protector of a car, country house or apartment.

      Due to the use of high-quality fire extinguishing powder, as well as modern charging technology with nitrogen purified from water vapor, it has a higher fire rank (fire extinguishing capacity) than that provided for by the current GOST R: for class A - 2 times (2A instead of 1A); for class B - 1.6 times (55V, instead of 34V). It is equivalent to the standard OP-4 fire extinguisher.

      The fire extinguisher OP-3-ABCE-110 OM2 MIG is manufactured in a corrosion-resistant design according to C4-N ISO 12944 to protect objects with a corrosive environment.

      The fire extinguisher cylinder is certified to comply with the requirements of Technical Regulations TR CU 032/2013 “On the safety of equipment operating under excess pressure”.

      In accordance with the current regulations, the marking of the MIG powder fire extinguisher cylinder is done mechanically and contains the following entries: the brand name of Pozhtechnika CJSC, the EAC mark of conformity, the name of the cylinder BP-3, the serial number of the cylinder, the month and year of production of the cylinder, the year of the next re-examination of the cylinder, the operating temperature range of the cylinder “from -50 ºС up to +50 ºС”, the operating and test pressure of the cylinder, the mass and volume of the empty cylinder.

  

ОП-3(з)- ABCE-110 МИГ.jpg
ОП-3 в локциях для карточки.jpg


WHAT IT IS WORTH PAYING ATTENTION TO:

Range of operation temperatures: from minus 50 to plus 50 ° C оС.
Marking in the form of accurate and nonerasable texts is applied on a cylinder: trademark of the powder fire extinguisher MIG; name of a cylinder «БП-3», serial number of a cylinder; month, year of release of a cylinder and year of its re-examination; Working and trial pressure of a cylinder; Weight and volume of a cylinder. Also the cylinder of the fire extinguisher is marked by EAC sign. The cylinder has the certificate on compliance of TR CU 032/2013.